PEST & TERMITE INSPECTIONS IN MELBOURNE
There is NO Insurance Cover for Termite damage – NONE!
PEST & TERMITE INSPECTION – Service Information
Subterranean Termites, wood borers and fungal decay all cause significant damage to residential properties not just in Melbourne but all throughout mainland Australia.
It only requires a gap of 2mm for Timber pests such as termites to be able to get inside your property. Termites enter your home without you knowing it and silently eat the structural timber. We are not only looking for traces of existing infestation, but we are also looking for any conducive conditions within the building that may allow possible infestation in the future.
Environmental factors and other changes can influence the susceptibility of termite attack and put your property at risk.
It takes a particular expert in order to detect any concealed infestation within a dwelling. Our leading Building Inspector is a certified Timber, Pest, and Termite Inspector – Certificate 3 in asset maintenance – pest management techniques. Since we use the latest technology Termitrac termite radar and moisture meters to detect an infestation, we are one of the preferred pest inspection providers in Melbourne
HOW MANY TERMITE INFESTATIONS HAVE BEEN IN YOUR SUBURB?? Medial Release CSIRO Forestry and Forest Products (CFFP) Scientist, Jim Creffield – TERMITES A MAJOR THREAT TO VICTORIA.
Our Pest and Termite Inspections are conducted in full compliance with Australian Standard 4349.3 and ensures that we inspect the following areas:
We make sure that all water overflow pipes are kept well away from the exterior walls of the premises.
We look for and identify any plumbing features that could either release water or are located too close to the outer walls of the property.
We ensure that no ventilation airflow is blocked as a result of the build-up from garden bed soil and that any drainage is both adequate and located far enough away from these areas.
We make sure that none of the boundary fences, trees or outbuildings have any indication of existing termite infestation and are kept in a dry and clean condition to prevent possible ingress in the future.
We will identify any areas of mould that we may see around internal floors and flooring within such rooms as the bathrooms, kitchens and laundries since these can be possible havens for termites and wood borers.
We check that there are no indications of leaks from water and drainage pipes that could create dampness thus encouraging termite infestation.
We use our Thermal Imaging Technology to carefully examine all exposed timber for indications of possible hollowness of the timber which is a sure indication that there are termites somewhere within the building.
In the first instance, we look for any easy identifiable termite activity within the internal roof structure.
We then check for water leakage from any plumbing in this area since this could create a dampness which would encourage termites to nest in the area.
In order to make sure that there are is adequate ventilation within the roof void which in turn enables the existence of a dry area, we carefully take moisture readings to support our findings.
As in all our main Building Inspections, we will identify any waste material that has been left behind by the original builders or subsequent occupants, since this could encourage quite a large infestation of pests and termites.
We will verify, from our moisture readings, that there is adequate ventilation and that there are no obstructions that could create a reduction in the airflow in the future.
We make sure that there are no indications of water leakage is from the wet rooms above such as the bathrooms and kitchens as these would give an open invitation for pests and termites to nest in this area.
As a final check, we ensure that there are no signs of poor drainage and that any weep holes have not or are likely to be blocked by discarded debris or build-up of gardening material around the building.
Investigate timber pest attack.
Provide a full written condition report regarding the susceptibility of termite & timber pest infestation at your home or investment property.
Pay particular attention to identifying nests both live and inactive as well as live and past activity.
PRE-PURCHASE BUILDING INSPECTIONS
It is essential that you are aware of what you are buying before you hand over the money! Are there any major defects that could cost you …
COMBINED BUILDING AND TERMITE INSPECTIONS
Of all the inspection services that we offer, the Combined Building and Termite Inspection is the best value for money. Two of our inspectors …
PRE-AUCTION PROPERTY INSPECTIONS
We are often asked this question, particularly when the auction may be held within the next 48 hours. Some people are worried that if …
PRE-SALES BUILDING INSPECTIONS
Show Your Buyers Exactly What They Are Going To Buy! It is a pretty logical fact that virtually all sellers want to sell their property as quickly …
PRE-HANDOVER HOME INSPECTIONS
Your brand new dream home has just about reached completion. The time has almost arrived when you hand over the final payment and …
Asbestos has been used in the manufacture of more than 3000 products because of its durability, fire resistance and excellent insulating properties…
Not only are our Inspections conducted in accordance with the appropriate Australian Standards, if you are not happy with any aspect of our work, we guarantee to rectify the issues within 24 hours.
Do you need help with Building inspection or pest inspection report? Fill out this form to get in touch.